Precautions for operating floor CNC boring and milling machine

With the development of economy, the upgrading of production and processing equipment is inevitable, and the operation of CNC machine tools is the same. In order to keep up with the pace of development of the times, the use of machine tools and equipment also needs to be constantly upgraded, and the operation of floor CNC boring and milling machines should not be sloppy. After all, improper operation or operation problems will affect the quality of processed products. Therefore, we need to pay more attention in the ordinary application process. Let’s talk with Xiao Bian about it.
In the application of floor CNC boring and milling machines, we need to often check the grid voltage used by CNC machines to keep the grid voltage normal. After 5 minutes of startup, check that it is normal, and then it can be used normally. Start the machine normally, open the automatic lubrication system, check the guide rail protection, and wipe oil in time. When shutting down the machine tool, clean up the machine tool dust in time, wipe oil on the guide rail and workbench in time, and turn off the power in time.
If the user buys this machine tool primarily for precision machining of the workpiece, one or half of the wire or even less, the accuracy of the floor CNC boring and milling machine is the center of gravity. The force of the floor CNC boring and milling machine mainly depends on the engine, but there is one important thing to be careful about: the screw rod. If the moral requirements of the screw rod cannot be met or the screw rod is too thin, if the power of the planning machine is too large, the machine speed is fast, and the cutting capacity is large, the screw rod can be deformed or broken. Therefore, in this case, the bearing capacity of the lead screw should also be considered.